12-Charge Howitzer

Rated 4.0 from 3 votes
Category Miscellaneous
Theme Modern
Size Medium
File Format .schematic
Submitted by GameBreaker
Posted on March 9th, 2014 04:27 PM EST
Download(s) Has been downloaded 108 times


Length 5 Width 19 Height 5


TNT howitzer, Piston-Assisted, Model 12-1 5195.

Firing procedure consists of three steps:

Step One:
Loading of charges is done manually by hand. Load TNT charges into the breach in the rear of the barrel. Use the lever to ram the charges into the barrel. Place 12 charges.

Step Two:
Push the Button on the dropper. This will load a single TNT projectile into the dispenser into the front end of the barrel via Hoppers. This may take a few seconds for the projectile to reach.

Step Three:
Fire by pressing the Button below the Piston's Lever. Fire controls are sequenced with Repeaters.

Weapon is still experimental, forward range still unknown.

IMPORTANT: When rotating this schematic, care must be taken to ensure that the Hoppers are running from the Dropper in the rear to the Dispenser in the front. The Hoppers, Signs, and Repeaters may face the wrong direction if rotated in certain versions of MCEdit.

Other Creations From GameBreaker

Fk. Pz. Pfeil
North American B-25
Forge House
Church with Cemetery

Comments (4)

And here I've just been building decorative cannons with command blocks on the front using this code: /summon PrimedTnt ~ ~2 ~ {Fuse:12,Motion:[2.0,0,0.0]}

Note that it's direction specific. Also it's short enough to use without a command block if you can use cheats.
  by WildBluntHickok
on March 14th, 2014 07:16 AM EST
Dangerous jaja!   by Wolli
on March 12th, 2014 11:38 AM EST
Can't be placed in WE - states "Unknown format null".   by xxDARKYODAxx
on March 10th, 2014 06:22 AM EST

My bad - correct comment but on the wrong schematic...sorry :)
  by xxDARKYODAxx
on March 10th, 2014 06:23 AM EST

Add a comment