The V6000 is Deepcool's top of the range VGA cooler. The V6000 offers superior cooling performance over the stock cooler thanks to its high quality dual 92 mm fans and array of six nickel-plated heatpipes which run the entire length of the cooler. The fans operate at around 25 dB(A) regardless of load which is much lower than the fan on a typical stock cooler which could be as high as 40 dB(A).
This is a perfect solution for overclockers looking to push their graphics card to its limits and also the silent enthusiast who demands quietness combined with low temperatures.
= Multi-compatible VGA cooler for both NVIDIA and ATI high-end VGA cards
= Six heatpipes transfer heat from the base to heatsink efficiently
= Aluminium heatsink with dense fin array offers high cooling performance
= Dual 92mm fans with TPE cover fan frame to absorb operating vibration and noise
The V6000's dual 92 mm fans have a rubber-coated frame, which helps to absorb vibration. Both fans have standard a 3-pin connector and a splitter/adapter cable is supplied allowing both fans to attach to one 3-pin fan header on the motherboard.
If your motherboard doesn't have any spare 3-pin fan headers then we would suggest using a PSU adapter such as the Zalman MC1.
The speed of the fans do not vary and remains constant at around 1800 RPM but if you prefer to have control over the V6000's fan speed, we would recommend that you use a Zalman FANMATE 2 or similar fan controller, which will allow you to set your preferred cooling/noise balance.
NOTE: PCB is not included, only the heatsink with fan is included. :)