Fully autonomous furnace that runs entirely on duplicated carpets.
Input and output run via Shulker boxes.
Carpet duplication must be enabled on paper servers.
Melting a full Shulker box takes about 2:30 minutes.
After 3:20, the box is in broth output chest.
A completely filled shulker box is automatically outputted.
However, if the shulker no longer has a free slot, the system recognizes this and outputs it.
If only a half-full shulker box is in the system, it must be retrieved via the extraction button.
There is a lever for the carpet duper, but this should always be on!
2 debug lamps, one showing if it is currently smelting, and one which indicates the carpet duper just run.
Hello, having some issues when it comes to unloading smeltable items into the furnaces, the chest minecart will continuously bounce back and forth and not stop to unload all of the smeltable items from the hopper above.
additionally, was wondering how you perfectly placed the hopper minecarts in between 4 block (the one thats surrounded by glass to split the meltables evenly)
on November 29th, 2022 09:07 PM EST Reply
Qu'est-ce qui ne fonctionne pas exactement ?
La duplication du tapis ou la distribution des objets ou autre chose ?
Il ne doit pas y avoir d'objets non fusibles dans les fours !
Il devrait déjà y avoir quelques tapis dans le four !
Fabric en soi ne pose aucun problème.
Cela dépend des mods que tu as installés.
on November 8th, 2022 09:29 AM EST Reply
Actually, everything you need to know is on the signs.
The shaker in the middle is the input. Just put everything you want to smelt in here and press the button next to it.
It may happen that the shulker is not caught by the hopper. In this case, you'll have to manually put it into the chest located on the floor below the shulker. You can also simply place shulker filled with smeltable items in this chest (NO Items in this chest).
NO non-meltable items are allowed in the input.
A completely filled shulker is automatically spent (when spent, a sound is played).
However, if the shulker has no more empty space, the system will detect this and dispense it.
If there is only a half-full Shulker in the system, it must be removed using the extraction button.
There is a lever for the carpet duper, but this should always be switched on!
2 debug lights, one that indicates if melting is in progress (the one on the right), and one that indicates that the carpet duper is in progress (to the left of the lever).
Translated with www.DeepL.com/Translator (free version)
on October 25th, 2022 03:46 AM EST Reply