Thaumic Wizard Tower with Bridge

Rating
Rated 4.1 from 58 votes
Category Towers
Theme Medieval
Size Medium
Submitted by Cymric75
Posted on July 23rd, 2018 06:09 PM EST
Download counter Has been downloaded 2800 times

Share it

Options

Download Add to favorites Report

Dimensions

Length 70 Width 24 Height 86

Youtube video

Description

Hi all,
This is my try to rebuild the Thaumcraft Wizard Tower from Kalhia, see Video Link
It was created in Minecraft 1.4.7 (FTB Ultimate) and I rebuild it in 1.12.2 as best I could. I think i made a little mistake with the hight of the Floors and also I couldn't figure out the Roof for 100%, so don't be to hard on me. ;)
I only had the Video to watch over and over again paused it, played it in slow motion and so on.
I also added under the Tower a space for the Runic Altar.

Oh and don't mind the blue and red Wool, I used them to mark the Borders of the Schematic :)

Minecraft version 1.12.2

Mods used are:
Thaumcraft 6.1beta
The Twilight Forrest 3.7.424
Journey Map for 1.12.2 (Version 5.5.2)
Bibliocraft 2.4.4
Schematica 1.8.0.169
+
LunatriusCore 1.2.0.42

For some Reasons the Video isn't working so -> https://www.youtube.com/watch?v=Q6XjvocDmUg

Others creations from Cymric75

Mage Tower from Jeracraft

Comments (11)

Such a nice build, is there any way you could get a world file of it? I don't have Schematica on my server and I don't think it would be very fair to make everyone install it to keep playing.   by Zenoxy
on May 26th, 2019 01:10 AM EST
Reply
I can find the schematic download link?
  by Korthaig
on January 8th, 2019 05:20 PM EST
Reply

Here on this Page under Download :)
  by Cymric75
on January 8th, 2019 06:05 PM EST
Reply
This is an amazing recreation, thanks for doing it. I was doing the same thing you did before I decided to look for a schematic: watching the video over and over to try to rebuild it, and got as far as the main walls. You saved me a ton of work on the upper floor and roof! :-)   by NerdimusPrime
on September 22nd, 2018 08:28 AM EST
Reply
It doesn't work for FTB Revelations. Not sure if that is what Strovo means or not.   by SierraAlphaKilo
on August 10th, 2018 04:50 PM EST
Reply

It doesn't work for FTB Revelations 2.2.0. And yes, I have installed the other mods you listed. It loads 2 red wool, part of a wall, and some random armor stands.
  by SierraAlphaKilo
on August 10th, 2018 04:54 PM EST
Reply

Okay, last post today...

Correction, it is not part of a wall, it is cobble and grass. I also tried loading a new 1.12 world with only the mods you listed + world edit + forge and Baubles dependency for thaumcraft. it still doesn't work for me... not sure how others got this to work but I can't.
  by SierraAlphaKilo
on August 10th, 2018 05:30 PM EST
Reply

Hm thats really strage I installed FTB Revelations added to the Mod Folder Schematica and LunatriusCore. After that the Schematic Folder with the Schematic in it, loaded FTB Revelations, Created a Creative World, Loaded the Schematic in and voila had the whole Blueprint in front of me. Build the Bridge and the lower half with the Printer and everything worked fine. Also created a Survival World, and here also I had no Problems to load in the Blueprint.
I have no Idea right now what could cause this Problem for you.
  by Cymric75
on August 11th, 2018 02:53 AM EST
Reply

I figured out the problem. I was using worldedit to place the schematic instead of the Schematica mod... Sometimes I feel so stupid. Thanks for your help!
  by SierraAlphaKilo
on August 11th, 2018 07:12 AM EST
Reply
It's a pity that it does not work on an FTB server since the IDs are different   by Strovo
on August 8th, 2018 11:31 AM EST
Reply

Can you explain what didn't worked? I'm kinda confused about the IDs.
  by Cymric75
on August 8th, 2018 04:52 PM EST
Reply

Add a comment